Parameters |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Weight |
600.301152mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Current - Output |
64mA |
Number of Bits |
8 |
Propagation Delay |
8.1 ns |
Turn On Delay Time |
4.1 ns |
Family |
ABT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Prop. Delay@Nom-Sup |
6.3 ns |
High Level Output Current |
-32mA |
Low Level Output Current |
32mA |
Power Supply Current-Max (ICC) |
85mA |
Number of Input Lines |
16 |
Height |
2.59mm |
Length |
15.88mm |
Width |
7.49mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74ABT16373ADLG4 Overview
Package SSOP includes it. It is packaged in the way of Rail/Tube. It is designed with 8 bits. As far as this device is concerned, it has no terminations. With the supply voltage set at 5V, it is able to operate. It is equipped with 48 pin count. This electronic device belongs to the family of ABT. 48 pins are used in its design. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies required for this machine to operate. It consists of 16 input lines from which an electronic circuit can be built. A high efficiency supply voltage should be maintained at 5V. In total, it has 2 elements. The maximal power current (ICC) supplied for its operation reaches 85mA. 32mA represents the low level output current. -32mA is the high level output current. It is recommended that the operating temperature not exceed 85°C. A temperature greater than -40°C should be used for operation. 5.5V is the maximum voltage it supports. With a voltage of 4.5V, it operates at its minimum capacity. There is a logic IC BUS DRIVER used in the system. Its output current of 64mA ensures maximum design flexibility.
SN74ABT16373ADLG4 Features
SSOP package
8 Bits
48 pin count
48 pins
5V power supplies
2 elements
SN74ABT16373ADLG4 Applications
There are a lot of Texas Instruments SN74ABT16373ADLG4 Latches applications.
- Serial Input
- Hammer
- Display
- Programmable binary
- Bus system register with enable parallel lines at bus side
- Double bus register system
- PCs and Notebooks
- Communication systems
- High-speed logic
- Counting