SN74ABT16373ADLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 8.1 ns |
| Quiescent Current | 85mA |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16373ADLR Overview
In the 48-BSSOP (0.295, 7.50mm Width) package, it is embedded. It is packaged in the way of Tape & Reel (TR). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74ABT series. The design of this electronic part contains 16 bits. This device has been designed with 48 terminations available. The family 74ABT16373 includes it. A 5V voltage supply is required for operation. 48 pins are included. It is a member of the ABT family of electronic devices. In addition, it is designed with a pin number of 48. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of Bus Driver/Transceiver. There are 5V power supplies attached to it. Based on its reliable performance, this device is well suited to TR. With 64mA, maximum design flexibility is ensured. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 3 output lines. It consumes 85mA of quiescent current without being affected by external factors. A total of 2 elements are contained in it.
SN74ABT16373ADLR Features
48-BSSOP (0.295, 7.50mm Width) package
74ABT series
16 Bits
74ABT16373 family
48 pin count
48 pins
5V power supplies
2 elements
SN74ABT16373ADLR Applications
There are a lot of Texas Instruments SN74ABT16373ADLR Latches applications.
- High-speed logic
- Communication systems
- Pattern Generators
- BCD counting
- Watches
- Counters
- Pattern generators
- Parallel Output
- Address register
- Parallel data synchronization
