SN74ABT16374ADLR
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 5.9 ns |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
SN74ABT16374ADLR Overview
In the form of 48-BSSOP (0.295, 7.50mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74ABTseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 2mA quiescent current and is not affected by external forces. A total of 48terminations have been recorded. The 74ABT16374 family contains it. The power source is powered by 5V. Its input capacitance is 3.5pF farads. ABTis the family of this D flip flop. There is a base part number Bus Driver/Transceiverfor the RS flip flops. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 4.5V for normal operation. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The D latch runs on a voltage of 5V volts. The flip flop has 2embedded ports.
SN74ABT16374ADLR Features
Tape & Reel (TR) package
74ABT series
5V power supplies
SN74ABT16374ADLR Applications
There are a lot of Texas Instruments SN74ABT16374ADLR Flip Flops applications.
- CMOS Process
- Dynamic threshold performance
- Memory
- Data storage
- Load Control
- Convert a momentary switch to a toggle switch
- Digital electronics systems
- Common Clocks
- Data Synchronizers
- High Performance Logic for test systems
