SN74ABT16501DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 689.999043mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 76mA |
| Translation | N/A |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT16501DLRG4 Overview
There is an embedded version of it in the SSOP package. The superior flexibility of 1 circuits is achieved through their use. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 56 terminations. Keeping the supply voltage above 5V is necessary for normal operation of the device. The pin count is 56. The electronic part was designed using 18 Bits. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This electronic part is mounted in the way of Surface Mount. A 56-pin is used for its design. In the family of ABT devices, this electronic device belongs. Power is provided by 5V power supplies. POSITIVE EDGE is the trigger configured with it. The reliability of this device makes it well suited for TAPE AND REEL as a result of its proven reliability. Furthermore, it has the characteristic of WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION as well. The electrical part in question operates with a voltage of 5V as a supply voltage. It is operated by a voltage of 4.5V as the minimum supply voltage. As a result, it supports the maximum supply voltage of 5.5V. An output current at a high level is known as -32mA. Temperatures higher than -40°C are recommended for operation. In the ideal case, the operating temperature should be lower than 85°C.
SN74ABT16501DLRG4 Features
SSOP package
56 pin count
56 pins
5V power supplies
SN74ABT16501DLRG4 Applications
There are a lot of Texas Instruments SN74ABT16501DLRG4 Universal Bus Functions applications.
- Push-button lock
- Telecommunications
- Scanner
- Roof distributed power station
- Light-activated burglar alarm
- Street lights
- Remote monitoring
- Microprocessors
- Memory devices
- MPPT function (maximum power point tracking)
