SN74ABT16541ADLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 3.6 ns |
| Turn On Delay Time | 6 ns |
| Family | ABT |
| Logic Function | AND, Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 34mA |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT16541ADLG4 Overview
Logical driver uses a neat SSOP package. Rail/Tube external packaging. All of the 2 elements are put into use. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. ABT family part. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
SN74ABT16541ADLG4 Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
High Level Output: 64mA
Low Level Output: -32mA
BUS DRIVER Logic IC
SN74ABT16541ADLG4 Applications
There are a lot of Texas Instruments SN74ABT16541ADLG4 Buffers & Transceivers applications.
- Satellite communication
- Ethernet circuitry
- Cell phones
- Single fiber bidirectional application
- Metro access rings
- Desktop PC
- Shortwave receiver
- IP cameras
- Wireless smart house
- Fiber optic cable connection network
