SN74ABT16543DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Subcategory | Bus Driver/Transceiver |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 7.8 ns |
| Family | ABT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 5.1 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 35mA |
| Translation | N/A |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT16543DLG4 Overview
Logical driver uses a neat SSOP package. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Family ABT includes the buffer IC . 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under INDEPENDENT CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 16 bits are included within the electrical component. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 2 circuits.
SN74ABT16543DLG4 Features
Bus Driver/Transceiver
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
High Level Output: 64mA
Low Level Output: -32mA
REGISTERED BUS TRANSCEIVER Logic IC
SN74ABT16543DLG4 Applications
There are a lot of Texas Instruments SN74ABT16543DLG4 Buffers & Transceivers applications.
- Single to Multimode Fiber Conversion
- Wireless communication
- Point-to-point networking
- Cell phones
- Thermal management
- 1x/2x Fiber Channel
- Wireless modems
- Broadcast application
- Wireless transmission
- Interconnection between switches and computers
