Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ABT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Additional Feature |
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE |
HTS Code |
8542.39.00.01 |
Packing Method |
TAPE AND REEL |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74ABT16600 |
Pin Count |
56 |
Number of Outputs |
18 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
18-Bit |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
18 |
Propagation Delay |
4.7 ns |
Family |
ABT |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
Universal Bus Transceiver |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
4.9 ns |
Trigger Type |
NEGATIVE EDGE |
Control Type |
INDEPENDENT CONTROL |
Power Supply Current-Max (ICC) |
36mA |
Translation |
N/A |
Height Seated (Max) |
2.79mm |
Width |
7.49mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ABT16600DLR Overview
The package 56-BSSOP (0.295, 7.50mm Width) includes it. In other words, it is packaged in a manner similar to Cut Tape (CT). A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. Logic type Universal Bus Transceiver describes this electrical device. Surface Mount is pointing towards the electronic part. A higher operating temperature than -40°C~85°C is recommended. Due to its high and low output current options, 32mA 64mA's maximum level of flexibility is achieved when it comes to designing its features. This is a type of FPGA from the 74ABT series. The supply voltage for the machine is 4.5V~5.5V and it operates on that voltage. It belongs to 74ABT16600 family. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a rule of thumb, the supply voltage should be maintained above 5V to ensure normal operation. This device is equipped with 56 pins. Electronic parts such as this one are designed with 18 Bits. Transmission lines are terminated with 2 terminations, which are devices matching the line's characteristic impedance. The electronic part is mounted in Surface Mount-direction. A 56-pin is used in this design. It is a member of the ABT family of electronic devices. Powered by 5V power supplies, it runs on a battery. It is configured with a trigger that uses NEGATIVE EDGE. Based on its reliable performance, this device is well suited for TAPE AND REEL. Furthermore, it has the characteristic of WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE as well. A maximum amount of design flexibility can be achieved with 64mA due to its output current. There is a voltage of 5V applied to the supply voltage of this electrical part. A 18 output is configured on it.
SN74ABT16600DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ABT series
74ABT16600 family
56 pin count
56 pins
5V power supplies
18 outputs
SN74ABT16600DLR Applications
There are a lot of Texas Instruments SN74ABT16600DLR Universal Bus Functions applications.
- Square wave oscillators
- Electricity for military and civilian life in areas without electricity
- Memory
- Digital Electronics
- Calculator
- Data transmission control
- Controller ICs
- Automatic watering system
- Sewing machine
- Microprocessors