SN74ABT16821DGGR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.1 ns |
| Turn On Delay Time | 3.7 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.1 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 89mA |
| Number of Output Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
SN74ABT16821DGGR Overview
As a result, it is packaged as 56-TFSOP (0.240, 6.10mm Width). The package Cut Tape (CT)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. This D flip flop should not have a frequency greater than 150MHz. D latch consists of 2 elements. This process consumes 500μA quiescents. 56terminations have occurred. The 74ABT16821 family contains this object. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 3.5pF farads at the input. This D flip flop belongs to the family of ABT. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. There are 20bits in this flip flop. This D flip flop is well suited for TR based on its reliable performance. The power supply is 5V. The flip flop contains 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 64mA, it is possible to design the device in any way you want. In order to operate, the chip has 10 output lines.
SN74ABT16821DGGR Features
Cut Tape (CT) package
74ABT series
56 pins
20 Bits
5V power supplies
SN74ABT16821DGGR Applications
There are a lot of Texas Instruments SN74ABT16821DGGR Flip Flops applications.
- Data Synchronizers
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Asynchronous counter
- EMI reduction circuitry
- Cold spare funcion
- Storage registers
- Buffer registers
- Modulo – n – counter
