SN74ABT16821DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ABT16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.1 ns |
| Turn On Delay Time | 3.7 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.1 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 89mA |
| Number of Output Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16821DL Overview
In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 150MHz. D latch consists of 2 elements. There is a consumption of 500μAof quiescent energy. 56terminations have occurred. Members of the 74ABT16821family make up this object. A voltage of 5V provides power to the D latch. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as ABT. Surface Mount mounts this electronic component. 56pins are included in its design. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. There are 20bits in this flip flop. The D latch runs on a voltage of 5V volts. The flip flop contains 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With a current output of 64mA , it offers maximum design flexibility. It is designed with 10 output lines.
SN74ABT16821DL Features
Tube package
74ABT series
56 pins
20 Bits
5V power supplies
SN74ABT16821DL Applications
There are a lot of Texas Instruments SN74ABT16821DL Flip Flops applications.
- Memory
- Control circuits
- Buffered Clock
- Modulo – n – counter
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Differential Individual
- Reduced system switching noise
- Load Control
- Functionally equivalent to the MC10/100EL29
