SN74ABT16821DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ABT16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 20 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.1 ns |
| Turn On Delay Time | 3.7 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.1ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.1 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 89mA |
| Number of Output Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16821DLR Overview
The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. The package Cut Tape (CT)contains it. It is configured with Tri-State, Non-Invertedas an output. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 2 elements. It consumes 500μA of quiescent current without being affected by external factors. There are 56 terminations,The 74ABT16821 family contains it. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 3.5pF farads. In terms of electronic devices, this device belongs to the ABTfamily of devices. The electronic part is mounted in the way of Surface Mount. The 56pins are designed into the board. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part with 20bits has been designed. This D flip flop is well suited for TR based on its reliable performance. The D latch operates on 5V volts. The flip flop has 2embedded ports. For high efficiency, the supply voltage should be kept at 5V. With an output current of 64mA, it is possible to design the device in any way you want. There are 10 output lines in this JK flip flop.
SN74ABT16821DLR Features
Cut Tape (CT) package
74ABT series
56 pins
20 Bits
5V power supplies
SN74ABT16821DLR Applications
There are a lot of Texas Instruments SN74ABT16821DLR Flip Flops applications.
- Computers
- Bounce elimination switch
- Latch-up performance
- Balanced Propagation Delays
- Data storage
- Divide a clock signal by 2 or 4
- Set-reset capability
- Guaranteed simultaneous switching noise level
- Supports Live Insertion
- Registers
