SN74ABT16823DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 18 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Output Lines | 9 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT16823DGGR Overview
The flip flop is packaged in a case of 56-TFSOP (0.240, 6.10mm Width). There is an embedded version in the package Cut Tape (CT). T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74ABT series. There should be no greater frequency than 150MHzon its output. D latch consists of 2 elements. T flip flop consumes 500μA quiescent energy. There are 56 terminations,The 74ABT16823 family contains this object. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 3.5pFfarad input capacitance is used here. ABTis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 56 pins. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 18 Bits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. In order for the device to operate, it requires 5V power supplies. This flip flop has a total of 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. With a current output of 64mA , it offers maximum design flexibility. There are 9 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Additionally, there are WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.
SN74ABT16823DGGR Features
Cut Tape (CT) package
74ABT series
56 pins
18 Bits
5V power supplies
SN74ABT16823DGGR Applications
There are a lot of Texas Instruments SN74ABT16823DGGR Flip Flops applications.
- Shift registers
- Data transfer
- Buffered Clock
- Control circuits
- Bus hold
- Shift Registers
- ESD protection
- Load Control
- Functionally equivalent to the MC10/100EL29
- Buffer registers
