SN74ABT16823DLR

4.5V~5.5V 150MHz 18 Bit D-Type Flip Flop DUAL 74ABT16823 56 Pins 500μA 74ABT Series 56-BSSOP (0.295, 7.50mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74ABT16823DLR
Package: 56-BSSOP (0.295, 7.50mm Width)
Datasheet: -
Stock: 506
Description: 4.5V~5.5V 150MHz 18 Bit D-Type Flip Flop DUAL 74ABT16823 56 Pins 500μA 74ABT Series 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-BSSOP (0.295, 7.50mm Width)
Number of Pins	56
Weight	694.790113mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Series	74ABT
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Type	D-Type
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	WITH CLEAR AND CLOCK ENABLE
Subcategory	FF/Latches
Packing Method	TR
Technology	BICMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74ABT16823
Function	Master Reset
Output Type	Tri-State, Non-Inverted
Operating Supply Voltage	5V
Number of Elements	2
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Output Current	64mA
Number of Bits	18
Clock Frequency	150MHz
Propagation Delay	5.5 ns
Turn On Delay Time	3.9 ns
Family	ABT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	500μA
Output Characteristics	3-STATE
Current - Output High, Low	32mA 64mA
Max I(ol)	0.064 A
Max Propagation Delay @ V, Max CL	5.5ns @ 5V, 50pF
Prop. Delay@Nom-Sup	6.8 ns
Trigger Type	Positive Edge
Input Capacitance	3.5pF
Power Supply Current-Max (ICC)	80mA
Number of Output Lines	9
Count Direction	UNIDIRECTIONAL
Clock Edge Trigger Type	Positive Edge
Translation	N/A
Max Frequency@Nom-Sup	150000000Hz
Height	2.79mm
Length	18.41mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74ABT16823DLR Overview

The flip flop is packaged in a case of 56-BSSOP (0.295, 7.50mm Width). The package Cut Tape (CT)contains it. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74ABTseries of FPGAs. A frequency of 150MHzshould be the maximum output frequency. A total of 2elements are contained within it. It consumes 500μA of quiescent A total of 56 terminations have been made. JK flip flop belongs to 74ABT16823 family. The power supply voltage is 5V. A 3.5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of ABT. The electronic part is mounted in the way of Surface Mount. 56pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. 18bits are used in its design. Considering its reliability, this T flip flop is well suited for TR. There are 5V power supplies attached to it. The D flip flop has no ports embedded. Optimal efficiency requires a supply voltage of 5V. Its output current of 64mAallows for maximum design flexibility. There are 9 output lines on it. Additionally, you may refer to the additional WITH CLEAR AND CLOCK ENABLE of the electronic flip flop.