Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ABT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74ABT16841 |
Pin Count |
56 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Circuit |
10:10 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
20 |
Propagation Delay |
4.5 ns |
Turn On Delay Time |
3.2 ns |
Family |
ABT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
5.1 ns |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
89mA |
Number of Output Lines |
20 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ABT16841DLR Overview
The 56-BSSOP (0.295, 7.50mm Width) package contains it. Cut Tape (CT) is the packaging method. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. It is -40°C~85°C at the operating temperature. This FPGA is part of the 74ABT series. An electronic part with 20 bits is designed. This device has been designed with 56 terminations available. It is a member of the 74ABT16841 family. A 5V voltage supply is required for operation. With 56 pins, it is equipped. There is a device in this electronic family called ABT. The pin configuration of the device is 56. Electronic parts are mounted using the Surface Mount method. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is suitable for TR. The 64mA output current gives it maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. Input lines are converted into binary equivalents by 20 output lines. The element count is 2. A maximal power current (ICC) is generated for its operation at 89mA.
SN74ABT16841DLR Features
56-BSSOP (0.295, 7.50mm Width) package
74ABT series
20 Bits
74ABT16841 family
56 pin count
56 pins
5V power supplies
2 elements
SN74ABT16841DLR Applications
There are a lot of Texas Instruments SN74ABT16841DLR Latches applications.
- Motor Drives
- Shift register
- Up-Down Johnson
- Shift right with parallel loading
- Pseudo-random code generators
- Synchronous frequency dividers
- Buffer/Storage Registers
- Automotive Cluster
- Relay
- Parallel data synchronization