SN74ABT16843DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Additional Feature | WITH CLEAR AND PRESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16843 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.8 ns |
| Power Supply Current-Max (ICC) | 85mA |
| Independent Circuits | 2 |
| Number of Output Lines | 18 |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT16843DGGR Overview
In the package 56-TFSOP (0.240, 6.10mm Width), it can be found. Cut Tape (CT) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. The 74ABT series of FPGAs is the one this FPGA belongs to. There are 9 bits in this electronic part. This device is designed with 56 terminations. 74ABT16843 is the family name of it. The device works with a voltage of 5V for its supply voltage. It is equipped with 56 pin count. It is a member of the ABT family of electronic devices. The device has 56 pins. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. FF/Latches is the subcategory of this part. Vsup reaches 5.5V as the maximum supply voltage. There are 5V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 4.5V. As a result of its reliable performance, it is well suited for TAPE AND REEL. As the output current is 64mA, the design flexibility is maximum. It follows that 18 output lines are generated from the binary equivalent of the input line. There are also characteristics of WITH CLEAR AND PRESET associated with it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 85mA.
SN74ABT16843DGGR Features
56-TFSOP (0.240, 6.10mm Width) package
74ABT series
9 Bits
74ABT16843 family
56 pin count
56 pins
5V power supplies
SN74ABT16843DGGR Applications
There are a lot of Texas Instruments SN74ABT16843DGGR Latches applications.
- Address register
- Phase comparator
- Parallel Output
- Bus system register with enable parallel lines at bus side
- Shift left with parallel loading
- Flip-flops
- Multi-line decoders
- Relay replacement
- Buffer Storage
- Serial Output Data Queuing
