Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
WITH DIRECTION CONTROL |
Subcategory |
Bus Driver/Transceivers |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
4.5 ns |
Quiescent Current |
24mA |
Turn On Delay Time |
6.3 ns |
Family |
ABT |
Logic Function |
Inverting, Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Logic IC Type |
BUS TRANSCEIVER |
Max I(ol) |
0.064 A |
High Level Output Current |
64mA |
Low Level Output Current |
32mA |
Control Type |
COMMON CONTROL |
Schmitt Trigger |
No |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74ABT2245DWE4 Overview
Logical driver uses a neat SOIC package. Rail/Tube external packaging. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a ABT family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 24mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC.
SN74ABT2245DWE4 Features
Bus Driver/Transceivers
WITH DIRECTION CONTROL
High Level Output: 32mA
Low Level Output: 64mA
BUS TRANSCEIVER Logic IC
SN74ABT2245DWE4 Applications
There are a lot of Texas Instruments SN74ABT2245DWE4 Buffers & Transceivers applications.
- Structural bonding
- IP cameras
- Point-to-point networking
- interconnection between switches
- Satellite ground stations
- Copper and fiber optic cables connection network
- SONET/SDH Network
- Remote controls
- Mainframes, workstations or storage devices
- Fiber-to-the-desktop