SN74ABT241ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT241 |
| Pin Count | 20 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 4.4 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 7.1 ns |
| Family | ABT |
| Logic Function | AND, Buffer, Inverting |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 4 |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT241ADBR Overview
Logical driver uses a neat 20-SSOP (0.209, 5.30mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74ABT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Family ABT includes the buffer IC . 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74ABT241" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceiver. The digital buffer starts up under ENABLE LOW/HIGH control technology. In quiescent state, the electronic part uses 30mA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Because of its 8 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74ABT241ADBR Features
Bus Driver/Transceiver
SN74ABT241ADBR Applications
There are a lot of Texas Instruments SN74ABT241ADBR Buffers & Transceivers applications.
- Remote controls
- Point-to-point networking
- Single fiber bidirectional application
- Carrier phase observations
- Portable radio
- Metro access rings
- TV signal transmission
- Notebook
- Structural bonding
- Cell phones
