SN74ABT273DBRG4
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 400μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
SN74ABT273DBRG4 Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. A package named Tape & Reel (TR)includes it. The output it is configured with uses Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74ABT series. A frequency of 150MHzshould not be exceeded by its output. In total, there are 1 elements. This process consumes 400μA quiescents. Terminations are 20. You can search similar parts based on 74ABT273. A voltage of 5V provides power to the D latch. Its input capacitance is 7pFfarads. In terms of electronic devices, this device belongs to the ABTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. Due to its superior flexibility, it uses 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 5V volts is applied to it. In order to ensure high efficiency, the supply voltage should remain at 5V. With a current output of 64mA , it offers maximum design flexibility.
SN74ABT273DBRG4 Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT273DBRG4 Applications
There are a lot of Texas Instruments SN74ABT273DBRG4 Flip Flops applications.
- Pattern generators
- Data Synchronizers
- QML qualified product
- Memory
- Matched Rise and Fall
- Buffered Clock
- ATE
- Clock pulse
- Data storage
- Shift Registers
