SN74ABT273DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 400μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT273DW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ABTseries contain this type of chip. You should not exceed 150MHzin its output frequency. D latch consists of 1 elements. There is a consumption of 400μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74ABT273. It is powered by a voltage of 5V . This JK flip flop has a 7pFfarad input capacitance. The electronic device belongs to the ABTfamily. It is mounted in the way of Surface Mount. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. In order to achieve its superior flexibility, 8 circuits are used. A total of 5V power supplies are needed to run it. For high efficiency, the supply voltage should be set to 5V. With a current output of 64mA , it offers maximum design flexibility.
SN74ABT273DW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT273DW Applications
There are a lot of Texas Instruments SN74ABT273DW Flip Flops applications.
- Frequency division
- Pattern generators
- Clock pulse
- Balanced 24 mA output drivers
- Bus hold
- Individual Asynchronous Resets
- Test & Measurement
- ESCC
- Automotive
- Frequency Divider circuits
