SN74ABT273PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.4 ns |
| Turn On Delay Time | 2.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 400μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT273PW Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tube, it is embedded. In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 150MHz. In total, there are 1 elements. As a result, it consumes 400μA quiescent current. There have been 20 terminations. The object belongs to the 74ABT273 family. A voltage of 5V is used as the power supply for this D latch. JK flip flop input capacitance is 7pF farads. Devices in the ABTfamily are electronic devices. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 64mA.
SN74ABT273PW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT273PW Applications
There are a lot of Texas Instruments SN74ABT273PW Flip Flops applications.
- Data transfer
- Individual Asynchronous Resets
- EMI reduction circuitry
- Digital electronics systems
- Data storage
- Functionally equivalent to the MC10/100EL29
- Patented noise
- Computers
- Reduced system switching noise
- ESD protection
