SN74ABT3614-30PQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-BQFP Bumpered |
| Number of Pins | 132 |
| Weight | 4.608697g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARITY GENERATOR/CHECKER, MAILBOX |
| Subcategory | FIFOs |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 33.4MHz |
| Base Part Number | 74ABT3614 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 64 x 36 x 2 |
| Element Configuration | Dual |
| Nominal Supply Current | 130mA |
| Max Supply Current | 130mA |
| Access Time | 15ns |
| Data Bus Width | 36b |
| Direction | Bidirectional |
| Organization | 64X36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Density | 4.5 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 36b |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT3614-30PQ Overview
You can find FIFO memory chip in package 132-BQFP Bumpered .There is a case Tray in which it is packaged.There is a 4.5K 64 x 36 x 2 MB memory on the FIFO chips, which can be used to store both applications and data.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.The FIFO memory's mounting type is Surface Mount .To operate, the FIFO products requires a voltage supply of 4.5V~5.5V .A component in the 74ABT series, this is an memory logic.Surface Mount is memory IC's recommended mounting method.Memory IC belongs to the 74ABT3614 family.Supply voltages of 5V are capable of achieving high efficiency.132 terminations are contained in FIFO means.Operation pins are 132 .There is a maximum current requirement of 130mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.There is a self-contained gadget within FIFOs .It is capable of maintaining good accuracy with a frequency of 33.4MHz .Components normally possess 5V power supplies.It is also possible to generate PARITY GENERATOR/CHECKER, MAILBOX with the use of this FIFO memory.By using 2 circuits, FIFO memory chip has greater flexibility.
SN74ABT3614-30PQ Features
4.5K 64 x 36 x 2 memory size
74ABT series
Best part number of 74ABT3614
FIFOs category
SN74ABT3614-30PQ Applications
There are a lot of Texas Instruments SN74ABT3614-30PQ FIFOs Memory applications.
- Smart Meter
- Signal processing
- Extended product-change notification
- SPD for DDR3 Memory Modules
- Tape controllers
- Communications Systems
- Microprogramming
- GPS Offender Tracking
- Event Recorder
- Multi-stage synchronizer
