SN74ABT373DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT373DBR Overview
There is an embedded version of it in package 20-SSOP (0.209, 5.30mm Width). A Cut Tape (CT) package is used to package it. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. In the 74ABT series, this FPGA is located. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. 74ABT373 is the family name of it. In order to operate it, the supply voltage must be 5V. 20 pins are included. ABT is the family name of this electronic device. There are 20 pins on it. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. This device is well suited for TR based on its reliable performance. Its output current of 64mA ensures maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Without external influences, it consumes 30mA of quiescent current. The circuit's superior flexibility is achieved through the use of 8 circuits.
SN74ABT373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373DBR Applications
There are a lot of Texas Instruments SN74ABT373DBR Latches applications.
- Frequency dividing
- Buffer Storage
- Decade counting
- Ring counter
- Meter applications
- Display driver
- Address register
- Shift right register
- Multi-line decoders
- Display
