SN74ABT373DW
| Parameters | |
|---|---|
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
SN74ABT373DW Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. It is packaged in the way of Tube. It is configured with an output of Tri-State. This electrical device has the logic type D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ABT series. There are 8 bits in this electronic part. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74ABT373. In order to function, the supply voltage should be set to 5V. It is equipped with 20 pin count. This electronic device belongs to the family of ABT. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. There are 5V power supplies attached to it. There are electronic circuits attached to the 8 input lines. Its 64mA output current allows for maximum design flexibility. High efficiency requires a voltage supply of 5V. The quiescent current consumed by it is 24mA because it is unaffected by external factors. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 30mA.
SN74ABT373DW Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373DW Applications
There are a lot of Texas Instruments SN74ABT373DW Latches applications.
- Shift right with parallel loading
- Instrumentation
- Automotive Infotainment
- Watches
- Multistage ripple counting
- Address register
- Pattern Generators
- Double bus register system
- Ring counter
- Shift left with parallel loading
