SN74ABT373DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT373DWG4 Overview
In the SOIC package, it is embedded. Packaged in the way of Rail/Tube. It is designed with 8 bits. A device such as this has 20 terminations designed. A 5V voltage supply is required for operation. With 20 pins, it is equipped. It is a member of the ABT family of electronic devices. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. FF/Latches is the subcategory of this part. The system is powered by 5V sources. Optimal efficiency requires 5V as the supply voltage. The superior flexibility of the system is achieved through its use of 8 circuits. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 30mA. It is set to zero for the low level output current. -32mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. The operating temperature should be higher than -40°C. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V. A BUS DRIVER logic IC is used. Its 64mA output current allows for maximum design flexibility.
SN74ABT373DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ABT373DWG4 Applications
There are a lot of Texas Instruments SN74ABT373DWG4 Latches applications.
- Up/down difference counting
- Buffer/Storage Registers
- Audio and video switching
- Parallel Input
- Shift left with parallel loading
- Parallel Input
- Pattern Generators
- Bus system register with enable parallel lines at bus side
- Instrumentation
- Frequency
