Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ABT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74ABT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
7.2 ns |
Quiescent Current |
24mA |
Turn On Delay Time |
4.6 ns |
Family |
ABT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
6.2 ns |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
30mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ABT373DWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Cut Tape (CT) is the way in which it is packaged. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. In the 74ABT series, this FPGA is located. An electronic part with 8 bits is designed. A device with this design has 20 terminations. 74ABT373 is its family. In order to function, the supply voltage should be set to 5V. 20 pins are included. It is a member of the ABT family of electronic devices. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. It operates from 5V power supplies. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is well suited to TR. The output current of 64mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 24mA of quiescent current without being affected by outside factors. Its maximum current supply (ICC) reaches 30mA.
SN74ABT373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373DWR Applications
There are a lot of Texas Instruments SN74ABT373DWR Latches applications.
- TV Set-top Boxes
- A/D and D/A conversion
- Pseudo-random code generators
- General-Purpose Register
- High-speed logic
- Shift right register
- Meter applications
- Parallel-to-Serial Data Conversion
- Relay replacement
- PCs and Notebooks