SN74ABT373N
| Parameters | |
|---|---|
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | 74ABT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
SN74ABT373N Overview
A package called 20-DIP (0.300, 7.62mm) contains it. The package is in the form of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Through Hole. There is no supply voltage for this device. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74ABT family. This electronic part is designed with 8 Bits. A device with this design has 20 terminations. It is a member of the 74ABT373 family. A 5V voltage supply is required for operation. 20 pins are available on it. It is a member of the ABT family of electronic devices. The 20 pins are designed into it. Mounting this electronic component follows the Through Hole method. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. It operates from 5V power supplies. It consists of 8 input lines from which an electronic circuit can be built. As the output current is 64mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Aquiescent current is consumed by 24mA without being affected by external forces. Its maximum current supply (ICC) reaches 30mA.
SN74ABT373N Features
20-DIP (0.300, 7.62mm) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373N Applications
There are a lot of Texas Instruments SN74ABT373N Latches applications.
- Lamp and Display (LED)
- Network Switches
- Counter control
- Counter
- Shift Registers
- PCs and Notebooks
- Avionics
- Decade counting
- Watches
- BCD counting
