SN74ABT373NSRE4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | DUAL |
SN74ABT373NSRE4 Overview
SOP contains it. Tape and Reel is the packaging method. The electronic part in this image has 8 bits. A device such as this has 20 terminations designed. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. It is a member of the ABT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies required for this machine to operate. The supply voltage should be maintained at 5V for high efficiency. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 32mA low level output current set. It is set to zero for the high level output current. The operating temperature should be lower than 85°C. Temperatures above -40°C should be used. There is a maximum voltage supply of 5.5V that can be applied to it. There is a minimum supply voltage of 4.5V for it. As for the logic IC it uses, it is a BUS DRIVER. The output current of this device is 64mA, which makes it a very flexible design element.
SN74ABT373NSRE4 Features
SOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ABT373NSRE4 Applications
There are a lot of Texas Instruments SN74ABT373NSRE4 Latches applications.
- Hammer Device Information
- General-Purpose Register
- Decade counting
- Meter applications
- Counter control
- Shift left register
- Programmable binary
- Frequency
- Timers
- Up/down difference counting
