SN74ABT373PWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Turn On Delay Time | 4.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT373PWE4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A Tube package is used to package it. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. It is a type of FPGA belonging to the 74ABT series. It is designed with 8 bits. This device is designed with 20 terminations. The family in which it belongs to is 74ABT373. With the supply voltage set at 5V, it is able to operate. It has 20 pins that makes it easy to use. It is a member of the ABT family of electronic devices. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. In the subcategory FF/Latches, this part belongs. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Its 64mA output current allows for maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. A maximal power current (ICC) is generated for its operation at 30mA.
SN74ABT373PWE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT373 family
20 pin count
20 pins
5V power supplies
SN74ABT373PWE4 Applications
There are a lot of Texas Instruments SN74ABT373PWE4 Latches applications.
- Decade counting
- Shift left with parallel loading
- Watches
- Decade counting 7-segment decimal display
- Parallel Input
- High-speed logic
- Parallel data synchronization
- Automotive Body Electronics
- Hammer
- Digital bus buffer
