SN74ABT374APWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 4.2 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT374APWG4 Overview
The flip flop is packaged in a case of TSSOP. T flip flop uses TTLas the output. A total of 1elements are contained within it. A total of 20 terminations have been made. Power is supplied from a voltage of 5V volts. The electronic device belongs to the ABTfamily. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. As a result of its reliable performance, this T flip flop is suitable for TUBE. There are 5V power supplies attached to it. This D flip flop is equipped with 0 ports. For high efficiency, the supply voltage should be kept at 5V. A -32mAvalue is set for the high level output current. It is set to 64mAfor low level output current. Operating temperatures should be lower than 85°C. The operating temperature should be higher than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to achieve a frequency of 200MHz. It adopts a logic IC of type BUS DRIVER. A total of 1 functions are available on the T flip flop. 20pins are available on this JK flip flop. It offers maximum design flexibility with its output current of 64mA.
SN74ABT374APWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT374APWG4 Applications
There are a lot of Texas Instruments SN74ABT374APWG4 Flip Flops applications.
- Memory
- Divide a clock signal by 2 or 4
- ESD performance
- Buffer registers
- CMOS Process
- QML qualified product
- Automotive
- Count Modes
- Storage Registers
- ESD protection
