SN74ABT377ADW
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
SN74ABT377ADW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. Its output frequency should not exceed 150MHz. In total, it contains 1 elements. During its operation, it consumes 250μA quiescent energy. Currently, there are 20 terminations. The 74ABT377 family contains this object. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3.5pF farads at the input. In this case, the D flip flop belongs to the ABTfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. The superior flexibility of this product is achieved by using 8 circuits. The D latch runs on a voltage of 5V volts. High efficiency requires the supply voltage to be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. It is also characterized by WITH HOLD MODE.
SN74ABT377ADW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT377ADW Applications
There are a lot of Texas Instruments SN74ABT377ADW Flip Flops applications.
- Synchronous counter
- Bus hold
- Communications
- Dynamic threshold performance
- Supports Live Insertion
- Set-reset capability
- Buffered Clock
- Test & Measurement
- Latch-up performance
- Data Synchronizers
