SN74ABT377ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT377ADWR Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 4.5V~5.5V is required for operation. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 150MHz. There are 1 elements in it. As a result, it consumes 250μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74ABT377 family. Power is supplied from a voltage of 5V volts. This JK flip flop has a 3.5pFfarad input capacitance. This D flip flop belongs to the family of ABT. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TR. The power supply is 5V. In order to ensure high efficiency, the supply voltage should remain at 5V. The output current of 64mA makes it feature maximum design flexibility. Additionally, you may refer to the D latch's additional WITH HOLD MODE.
SN74ABT377ADWR Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT377ADWR Applications
There are a lot of Texas Instruments SN74ABT377ADWR Flip Flops applications.
- Counters
- Differential Individual
- EMI reduction circuitry
- Load Control
- Computing
- ESCC
- Clock pulse
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Event Detectors
