SN74ABT533ADBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT533ADBRG4 Overview
In the package 20-SSOP (0.209, 5.30mm Width), it can be found. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. This electrical device has Logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ABT series. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74ABT533 is its family. It operates with a supply voltage of 5V. The 20 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of ABT. It is designed with 20 pins. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 5V power supplies required for this machine to operate. A supply voltage (Vsup) greater than 4.5V is required. The reliability of this device makes it well suited to TAPE AND REEL. The binary equivalent of the input line is generated by 8 output lines. A maximal power current (ICC) is generated for its operation at 30mA.
SN74ABT533ADBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ADBRG4 Applications
There are a lot of Texas Instruments SN74ABT533ADBRG4 Latches applications.
- Automotive Infotainment
- Double bus register system
- Shift left with parallel loading
- Meter applications
- Frequency
- Stacked or Push-Down Registers
- Storage
- General-Purpose Register
- Address register
- Buffer/Storage Registers
