SN74ABT533ADW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT533ADW Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the packaging method. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. A device such as this has 20 terminations designed. As a member of the 74ABT533 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of ABT. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are required for it to operate. Electronic circuits are represented by 8 input lines. With 64mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. 3 output lines provide binary equivalents of input lines. The current consumed by the device is 24mA volts in quiescent mode, which cannot be affected by external factors.
SN74ABT533ADW Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ADW Applications
There are a lot of Texas Instruments SN74ABT533ADW Latches applications.
- Parallel data storage
- Ring counter
- A/D converters
- Counting
- Communication systems
- Automotive ADAS
- Automatic test equipment
- Display driver
- Serial Output Data Queuing
- Relay replacement
