SN74ABT533ADWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT533ADWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A package of Tape & Reel (TR) has been used. It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 4.5V~5.5V. The operating temperature is -40°C~85°C. The 74ABT series contains FPGAs of this type. An electronic part with 8 bits is designed. A device with this design has 20 terminations. The family in which it belongs to is 74ABT533. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. There is a device in this electronic family called ABT. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. There are 5V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 4.5V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. This device is well suited for TAPE AND REEL based on its reliable performance. As the output current is 64mA, the design flexibility is maximum. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. Without external influences, it consumes 24mA of quiescent current.
SN74ABT533ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ADWR Applications
There are a lot of Texas Instruments SN74ABT533ADWR Latches applications.
- Counter
- Counter control
- Decade counting
- Hammer Device Information
- TV Set-top Boxes
- Serial Output Register
- Serial Input
- Shift left register
- Parallel data storage
- Buffer Storage
