SN74ABT533ADWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT533ADWRE4 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). This package has the format of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74ABT family. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. As a member of the 74ABT533 family, it falls under that category. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is a member of the ABT family of electronic devices. There are 20 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. The device is powered by 5V power supplies. A supply voltage (Vsup) greater than 4.5V is required. Electronic circuits are represented by 8 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. Maximum power supply (ICC) for its operation is 30mA.
SN74ABT533ADWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ADWRE4 Applications
There are a lot of Texas Instruments SN74ABT533ADWRE4 Latches applications.
- Control circuits
- Counter timers
- Watches
- Digital bus buffer
- Ring counter
- Up/down difference counting
- Automotive Body Electronics
- Hammer Device Information
- Programmable binary
- A/D and D/A conversion
