SN74ABT533AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT533AN Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. Tube is the way it is packaged. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. A 4.5V~5.5V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. In the 74ABT series, this FPGA is located. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family it belongs to is 74ABT533. A 5V voltage supply is required for operation. It has 20 pins that makes it easy to use. It is a member of the ABT family of electronic devices. The device has 20 pins. Electronic parts are mounted using the Through Hole method. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. There is 5V power supply for it. It contains 8 input lines where electronic circuits are present. It features maximum flexibility in design due to 64mA output current. High efficiency requires a supply voltage of 5V. The maximal power current (ICC) supplied for its operation reaches 30mA.
SN74ABT533AN Features
20-DIP (0.300, 7.62mm) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533AN Applications
There are a lot of Texas Instruments SN74ABT533AN Latches applications.
- Serial Input
- Programmable binary
- Lamp and Display (LED)
- Hammer Device Information
- Pattern generators
- Counter control
- Hammer
- Buffer Storage
- Automotive HEV/EV Powertrain
- Multi-line decoders
