SN74ABT533ANSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT533ANSR Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. It is packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. The operating temperature is -40°C~85°C. The 74ABT series of FPGAs is the one this FPGA belongs to. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. This type belongs to the 74ABT533 family. In order to function, the supply voltage should be set to 5V. There are 20 pins on it. It is a member of the ABT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. 5V power supplies are needed to operate it. Ensure that the supply voltage (Vsup) is greater than 4.5V. Based on its reliable performance, this device is well suited to TAPE AND REEL. 8 output lines generate the binary equivalent of the input lines. In order to operate properly, its maximum power current (ICC) should be 30mA.
SN74ABT533ANSR Features
20-SOIC (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ANSR Applications
There are a lot of Texas Instruments SN74ABT533ANSR Latches applications.
- PCs and Notebooks
- Digital bus buffer
- Bus system register with enable parallel lines at bus side
- Decade counting 7-segment decimal display
- Parallel Input
- Frequency
- Phase comparator
- Automotive Cluster
- Data acquisition
- Shift right register
