SN74ABT533ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT533ANSRE4 Overview
The 20-SOIC (0.209, 5.30mm Width) package contains it. This package has the format of Tape & Reel (TR). In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ABT series. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. 74ABT533 is the family name of it. In order to function, the supply voltage should be set to 5V. The 20 pind are equipped with it. ABT is the family name of this electronic device. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 5.5V. There are 5V power supplies required for this machine to operate. (Vsup) should be greater than 4.5V. On the basis of its reliability, this device is well suited for TAPE AND REEL. 8 output lines generate the binary equivalent of the input lines. When the maximum power current (ICC) is supplied for its operation, it reaches 30mA.
SN74ABT533ANSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ANSRE4 Applications
There are a lot of Texas Instruments SN74ABT533ANSRE4 Latches applications.
- Display driver
- Pattern Generators
- Ring counter
- Up-Down Johnson
- Serial Output Data Queuing
- Decade counting 7-segment decimal display
- Four-bit storage with output enable
- Parallel-to-Serial Data Conversion
- Motor Drives
- Automotive Body Electronics
