SN74ABT533ANSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT533ANSRG4 Overview
20-SOIC (0.209, 5.30mm Width) contains it. A Tape & Reel (TR) package is used to package it. Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the 74ABT series. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. 74ABT533 is its family. In order to function, the supply voltage should be set to 5V. 20 pins are provided. It is a member of the ABT family of electronic devices. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches includes this part. The maximal supply voltage (Vsup) reaches 5.5V. There is 5V power supply for it. There should be a voltage supply (Vsup) greater than 4.5V. This device is well suited for TAPE AND REEL based on its reliable performance. A binary equivalent of the input line is generated by the 8 output lines. In order for the device to operate at its maximum power, the maximum power current (ICC) of 30mA is needed for operation.
SN74ABT533ANSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533ANSRG4 Applications
There are a lot of Texas Instruments SN74ABT533ANSRG4 Latches applications.
- A/D and D/A conversion
- Decade counting
- Control circuits
- Double bus register system
- Display
- Address register
- Parallel-to-Serial Data Conversion
- Parallel data synchronization
- Buffer Storage
- Automotive ADAS
