SN74ABT533APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 4.9 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.6 ns |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT533APWR Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. A Cut Tape (CT) package is used to package it. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74ABT series is associated with this FPGA. The design of this electronic part contains 8 bits. A device such as this has 20 terminations designed. As a member of the 74ABT533 family, it falls under that category. A 5V voltage supply is required for operation. 20 pins are included. ABT is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there are 2 ports. In the subcategory FF/Latches, this part belongs. Vsup reaches 5.5V as the maximum supply voltage. It operates from 5V power supplies. (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is suitable for TR. Its output current of 64mA ensures maximum design flexibility. A binary equivalent of the input line is generated by the 3 output lines. The current consumed by the device is 30mA volts in quiescent mode, which cannot be affected by external factors. 8 circuits are used to provide this superior level of flexibility.
SN74ABT533APWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT533 family
20 pin count
20 pins
5V power supplies
SN74ABT533APWR Applications
There are a lot of Texas Instruments SN74ABT533APWR Latches applications.
- Shift right register
- Automatic test equipment
- Counting
- Buffer Storage
- Automotive Infotainment
- Parallel data synchronization
- Avionics
- PCs and Notebooks
- Shift Registers
- Data acquisition
