SN74ABT534ADBR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.7ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT534ADBR Overview
It is packaged in the way of 20-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Cut Tape (CT). It is configured with Tri-State, Invertedas an output. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74ABTseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 175MHz. A total of 1elements are present in it. It consumes 250μA of quiescent current without being affected by external factors. Terminations are 20. JK flip flop belongs to 74ABT534 family. A voltage of 5V provides power to the D latch. Its input capacitance is 3.5pFfarads. In terms of electronic devices, this device belongs to the ABTfamily of devices. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with 8bits. Using 8 circuits, it is highly flexible. Considering the reliability of this T flip flop, it is well suited for TR. A power supply of 5Vis required to operate it. A D flip flop with 2embedded ports is available. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 64mA, it is possible to design the device in any way you want. It operates with 3 output lines.
SN74ABT534ADBR Features
Cut Tape (CT) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534ADBR Applications
There are a lot of Texas Instruments SN74ABT534ADBR Flip Flops applications.
- Asynchronous counter
- ESD protection
- Common Clocks
- Memory
- ATE
- Data transfer
- Control circuits
- Reduced system switching noise
- Parallel data storage
- Data Synchronizers
