SN74ABT534ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 7.6 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT534ADW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. A package named Tubeincludes it. T flip flop uses Tri-State, Invertedas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74ABT series. In order for it to function properly, its output frequency should not exceed 175MHz. A total of 1elements are present in it. There is 250μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ABT534 family contains this object. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3.5pF farads at the input. A device of this type belongs to the family of ABT. There is an electronic part mounted in the way of Surface Mount. There are 20pins on it. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 8 Bits. Due to its superior flexibility, it uses 8 circuits. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 64mA, this device offers maximum design flexibility. There are 3 output lines on it.
SN74ABT534ADW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534ADW Applications
There are a lot of Texas Instruments SN74ABT534ADW Flip Flops applications.
- Latch-up performance
- Common Clocks
- Balanced 24 mA output drivers
- Matched Rise and Fall
- Computing
- Circuit Design
- EMI reduction circuitry
- Power down protection
- Bus hold
- Bounce elimination switch
