SN74ABT534ANSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT534ANSR Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Inverted. It is configured with the trigger Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. A frequency of 175MHzshould be the maximum output frequency. In total, it contains 1 elements. T flip flop consumes 250μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74ABT534 family. Power is provided by a 5V supply. Its input capacitance is 3.5pF farads. In this case, the D flip flop belongs to the ABTfamily. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 8bits. Using 8 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 5V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 64mA makes it feature maximum design flexibility. In order to operate, the chip has 3 output lines.
SN74ABT534ANSR Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534ANSR Applications
There are a lot of Texas Instruments SN74ABT534ANSR Flip Flops applications.
- Instrumentation
- Digital electronics systems
- Balanced 24 mA output drivers
- Event Detectors
- Single Up Count-Control Line
- Frequency Divider circuits
- Clock pulse
- Memory
- Latch
- Consumer
