SN74ABT534APWR
| Parameters | |
|---|---|
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 6.7 ns |
| Turn On Delay Time | 4.5 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT534 |
| Function | Standard |
SN74ABT534APWR Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Cut Tape (CT)package. T flip flop uses Tri-State, Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. You should not exceed 175MHzin its output frequency. The element count is 1 . As a result, it consumes 250μA of quiescent current without being affected by external factors. There are 20 terminations,The 74ABT534 family contains this object. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 3.5pF farads. It belongs to the family of electronic devices known as ABT. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. Due to its superior flexibility, it uses 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A total of 5V power supplies are needed to run it. This D flip flop is equipped with 0 ports. For high efficiency, the supply voltage should be set to 5V. With an output current of 64mA, this device offers maximum design flexibility. It has 3 output lines to operate.
SN74ABT534APWR Features
Cut Tape (CT) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT534APWR Applications
There are a lot of Texas Instruments SN74ABT534APWR Flip Flops applications.
- High Performance Logic for test systems
- Registers
- Functionally equivalent to the MC10/100EL29
- Shift Registers
- Consumer
- Balanced 24 mA output drivers
- ESD performance
- Frequency division
- CMOS Process
- ATE
