SN74ABT5400ADWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT5400 |
| Pin Count | 28 |
| Number of Outputs | 11 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 11 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 11 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 45mA |
| Turn On Delay Time | 8.7 ns |
| Family | ABT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | Buffer, Non-Inverting |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT5400ADWR Overview
Logical driver uses a neat 28-SOIC (0.295, 7.50mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 12mA 12mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74ABT series devices. 28 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a ABT family part that is attached to this electronic component. 28 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 28 pins. Enhanced with 2 ports. You can search "74ABT5400" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 45mA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 11 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 11 channels for high quality communication. It is sufficient to make 11 outputs.
SN74ABT5400ADWR Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74ABT5400ADWR Applications
There are a lot of Texas Instruments SN74ABT5400ADWR Buffers & Transceivers applications.
- Low power, low voltage systems
- Remote controls
- Laser diode bonding
- interconnection between computers
- Precision engineering measurement
- Portable radio
- Digital systems
- Changeing the frequency from IF to RF
- Single to Multimode Fiber Conversion
- Ethernet circuitry
