Parameters |
Weight |
156.687814mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74ABT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
Bus Driver/Transceiver |
Packing Method |
TR |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74ABT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
64mA |
Max Supply Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
7.2 ns |
Quiescent Current |
30mA |
Turn On Delay Time |
4 ns |
Family |
ABT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
6.2 ns |
Control Type |
ENABLE LOW |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
SN74ABT573ADBR Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it can be found as an embedded module. Cut Tape (CT) is the way in which it is packaged. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. There are a number of FPGAs in this series, including this one. The design of this electronic part is based on 8 bits. This device has 20 terminations. This type belongs to the 74ABT573 family. In order to function, the supply voltage should be set to 5V. 20 pins are included. It is a member of the ABT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. Subcategory Bus Driver/Transceiver includes this part. A total of 5V power supplies are needed to run it. The reliability of this device makes it well suited to TR. With an output current of 64mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. Without external influences, it consumes 30mA quiescent current. It achieves superior flexibility by using 8 circuits.
SN74ABT573ADBR Features
20-SSOP (0.209, 5.30mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies
SN74ABT573ADBR Applications
There are a lot of Texas Instruments SN74ABT573ADBR Latches applications.
- Automotive Infotainment
- Buffer Storage
- General-Purpose Register
- Shift register
- Flip-flops
- Stacked or Push-Down Registers
- Multistage ripple counting
- Decade counting 7-segment decimal display
- Control circuits
- Display driver