banner_page

SN74ABT573ADW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ABT Series 74ABT573 20 Pins DUAL BICMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ABT573ADW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 302
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ABT Series 74ABT573 20 Pins DUAL BICMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ABT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74ABT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 64mA
Max Supply Current 24mA
Number of Bits 8
Propagation Delay 5.7 ns
Quiescent Current 30mA
Turn On Delay Time 4 ns
Family ABT
Logic Function D-Type, Latch
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 6.2 ns
Control Type ENABLE LOW
Independent Circuits 1
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ABT573ADW Overview


Package 20-SOIC (0.295, 7.50mm Width) includes it. As a result, it has a packaging of Tube. It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device has been designed with 20 terminations available. 74ABT573 is its family. In order to operate it, the supply voltage must be 5V. 20 pins are included. In terms of electronic devices, this one is in the ABT family. There are 20 pins on it. Mounting this electronic component follows the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. The system is powered by 5V sources. It features maximum flexibility in design due to 64mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. There are no external factors that affect it, so it consumes 30mA quiescent current. To achieve its exceptional flexibility, it relies on 8 circuits.

SN74ABT573ADW Features


20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies

SN74ABT573ADW Applications


There are a lot of Texas Instruments SN74ABT573ADW Latches applications.

  • Programmable binary
  • Automotive ADAS
  • Ring counter
  • BCD counting
  • TV Set-top Boxes
  • Motor Drives
  • Automotive Body Electronics
  • Serial Output Data Queuing
  • Relay replacement
  • Serial Output Register

Write a review

Note: HTML is not translated!
    Bad           Good