SN74ABT573ADWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT573ADWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A Cut Tape (CT) package is used to package it. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74ABT573. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of ABT. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. As far as ports are concerned, this device has 2 ports. It belongs to the subcategory of Bus Driver/Transceiver. The device is powered by 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Its reliable performance makes it an excellent choice for TR. The output current of 64mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Input lines are generated as binary equivalents by 3 output lines. The quiescent current consumed by it is 24mA because it is unaffected by external factors.
SN74ABT573ADWR Features
20-SOIC (0.295, 7.50mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies
SN74ABT573ADWR Applications
There are a lot of Texas Instruments SN74ABT573ADWR Latches applications.
- Parallel Output
- General-Purpose Register
- Up-Down Johnson
- Buffer/Storage Registers
- Control circuits
- Decade counting 7-segment decimal display
- Communication systems
- Storage
- Stacked or Push-Down Registers
- Shift left with parallel loading
