SN74ABT573ADWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 30mA |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT573ADWRE4 Overview
It is embedded in the SOIC package. A package of Tape and Reel has been used. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. The supply voltage of the device is 5V. The device is equipped with 20 pins. It is a member of the ABT family of electronic devices. This board has 20 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. There are 5V power supplies attached to it. Its reliable performance makes it an excellent choice for TR. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 8 circuits enable it to achieve high performance. In addition, BROADSIDE VERSION OF 373 characterize it. In order for the device to operate at its maximum power, the maximum power current (ICC) of 30mA is needed for operation. It is set to zero for the low level output current. In the high level output current, the value is set to -32mA. Lower than 85°C is the recommended operating temperature. There should be a temperature above -40°C at which the device operates. The supply voltage is limited to 5.5V. A minimal voltage of 4.5V is needed to operate it. It uses the logic IC BUS DRIVER. The 64mA output current gives it maximum design flexibility.
SN74ABT573ADWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ABT573ADWRE4 Applications
There are a lot of Texas Instruments SN74ABT573ADWRE4 Latches applications.
- Automotive Infotainment
- Storage
- A/D converters
- Serial Input
- Parallel data synchronization
- Pseudo-random code generators
- Shift left register
- Buffer register
- Counter
- Instrumentation
