SN74ABT573AGQNR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFBGA |
| Number of Pins | 20 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT573 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Independent Circuits | 1 |
| Length | 4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ABT573AGQNR Overview
Package 20-VFBGA includes it. A package of Cut Tape (CT) has been used. The output it is configured with uses Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74ABT series. It is designed with 8 bits. This device has been designed with 20 terminations available. It belongs to 74ABT573 family. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. This electronic device is categorized as a ABT electronic device. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. When Vsup reaches 5.5V, the maximal supply voltage is reached. The device is powered by 5V power supplies. A voltage greater than 4.5V must be supplied as a power supply (Vsup). Based on its reliable performance, this device is well suited to TAPE AND REEL. There are no external factors that affect it, so it consumes 24mA quiescent current. In addition to that, it is also characterized by BROADSIDE VERSION OF 373.
SN74ABT573AGQNR Features
20-VFBGA package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies
SN74ABT573AGQNR Applications
There are a lot of Texas Instruments SN74ABT573AGQNR Latches applications.
- Shift left with parallel loading
- Serial Output Data Queuing
- PCs and Notebooks
- Hammer
- Address register
- Double bus register system
- Synchronous frequency dividers
- Four-bit storage with output enable
- Parallel-to-Serial Data Conversion
- Parallel data synchronization
