SN74ABT573APW
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | Bus Driver/Transceiver |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74ABT573APW Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. The package is in the form of Tube. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The voltage supply is 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. It is a type of FPGA belonging to the 74ABT series. This electronic part is designed with 8 Bits. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74ABT573. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. It is a member of the ABT family of electronic devices. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports that can be connected to it. The part belongs to the Bus Driver/Transceiver subcategory. 5V power supplies are needed to operate it. Input Lines consist of electronic circuits, and there are 8. With 64mA, maximum design flexibility is ensured. The supply voltage should be maintained at 5V for high efficiency. Additionally, it is characterized by BROADSIDE VERSION OF 373. The maximal power current (ICC) supplied for its operation reaches 30mA.
SN74ABT573APW Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies
SN74ABT573APW Applications
There are a lot of Texas Instruments SN74ABT573APW Latches applications.
- Double bus register system
- Automatic test equipment
- A/D converters
- Stacked or Push-Down Registers
- Buffer/Storage Registers
- Counter
- Pattern Generators
- Sample and hold register
- Serial Output Register
- Automotive ADAS
